Linscan-new-article

 
Linscan Device
Linscan-new Device

 

OFFERING A NUMBER OF UNIQUE FEATURES

SMART SOFTWARE:

  • Intuitive touch screen — similar to a smart phone
  • You can focus on clinical aspects (e.g. skin type and hair color) and the unit
  • proposes the right technical parameters (e.g. fluence and pulse duration)

OPTIMIZED TREATMENT STRATEGIES FOR HAIR REMOVAL

  • Standard Hair Removal Mode: proven parameters over many years
  • MCT (Motion Control Technology) Mode: painless treatments

POWERFUL CONTACT COOLING

  • Sapphire block can be cooled down to 0°C
  • Safe and comfortable treatments for ALL skin types
Linscan-new Device

LARGE SAPPHIRE CRYSTAL

  • Fast treatments
  • Good visibility of the treatment area

SMALL COMPACT DESIGN

  • Dimensions like an open laptop
  • Fully transportable
  • Optional cart

ONYCHOMYCOSIS

  • Safe and effective treatment settings for Onychomycosis
  • Faster, better results and less pain than Nd:YAG laser
Linscan-new Device

LINEAR SCANNING: REVOLUTIONARY HAIR REMOVAL

THE CONCEPT OF LINEAR SCANNING

A laser beam is scanned over the entire treatment area of 25 mm x 10 mm. This process takes approximately 0.5 s and is similar to the scanning of a photocopier.

ADVANTAGES OF LINEAR SCANNING

FAST: The large treatment area requires few positioning’s of the handpiece and allows very short treatment times e.g. 2 min for an axilla.

EFFECTIVE: The high power density in the actual laser beam allows high fluences in short pulses (e.g. 40 J/cm2 in 20 ms).

PROVEN TO BE EFFECTIVE

A clinical trial by Prof. Dr. Uwe Paasch from the University of Leipzig (Germany) proves that a linearly scanned diode is as effective as an Alexandrite laser: in the short and also in the long run.

HAIR REDUCTION

 

Linscan-new Device

Linscan-article

Linscan Device
Linscan Device

 

Diode laser with 808 nm
The LinScan is the most versatile diode laser on the market making hair removal profitable without anesthetics and gels.

 

Adaptable treatment options:

  • Fast treatments and a good visibility of the treatment area due to a large sapphire crystal
  • Remove fine hair with high fluence and short pulses
  • Protect darker skin with a strong integrated contact cooling
  • Offer virtually pain-free hair removal

This is possible with only one handpiece – thanks to the innovative linear scanning technology.

Linscan Device

INDICATIONS

Hair Removal

You are able to select the optimal treatment settings customized to each patient:

  • Standard Mode: clinically documented and proven to deliver results. High power and a wide variation of pulse durations enable treatment of nearly any hair diameter or hair color.
  • • Comfort Mode: virtually pain-free hair removal due to pulse stacking. Attractive option for physicians, medical spa professionals and patients.

Onychomycosis*

Very fast, safe and effective treatment of onychomycosis.

Vascular lesions*

Option to treat some vascular lesions in light skin types.

Linscan Device

ADVANTAGES FOR YOUR PRACTICE

Fast

  • Large treatment area up to 25 mm x 10 mm

Safe and comfortable for all skin types

  • Powerful contact cooling down to 0°C

Powerful contact cooling down to 0°C

  • Small footprint even with cart – fully transportable

Intelligent Software

  • Intuitive user interface similar to a smartphone
  • Easy and safe due to a guided input

Durable

  • Engineered and manufactured in Germany

Profitable

  • Very low running cost
  • No consumables or disposables
  • Long life-time of the diode
  • No service technician needed for installation or transport

Model for heavy duty users

The model Twin Scan has the opportunity to attach an applicator with a very large treatment area of 50 mm x 15 mm (7.5 cm²). The treatment of a back will take less than 15 minutes.

REVOLUTIONARY TECHNOLOGY

Linear Scanning

  • A laser beam is scanned over the entire treatment area.
  • This process takes approximately 1 sec and is similar to the scanning of a photocopier

Europrobe3.2-article

Gamma detection

With a single readout module and numerous gamma probe options, the Europrobe 3.2 is a unique system that fulfills all needs of per and post-operative detection as well as per-cutaneous localisation within 7 major clinical fields: Breast, gynaecology, ENT, dermatology, endocrinology, urology and nuclear medicine.

The characteristics of the detector, its shape, size and sensitivity maybe adapted to any appropriate isotopes needed to meet clinical requirements. Every probe can be suited with an optional collimator.

All our probes are manufactured in biocompatible medical stainless steel, and a sterile biocompatible cover has been specially developed to suit the whole range.

Furthermore, the Europrobe probes are compliant with the IP68, ISO10993-5, ISO10993-10, ISO10993-11 biocompatibility standards.

 

Europrobe3.2 Device

Europrobe features

Main Features

  • Automatic switching to most common radioisotopes. (99mTc, 125I, 131I, 18F)
  • Customized user etting of energy window.
  • Easy system set-up.
  • No need for calibration .
  • No drift of the probe in time.
  • 9 customized configurations + 1 default.
  • Europe: CE 0459 (G-Med: classe 2a)
  • USA FDA registered: 9032627

Technical specifications

  • Counting: 30 000 cps
  • Operating temperature: + 15˚C to 40˚C
  • Height: 245 mm
  • Width / Depth: 233 mm / 270 mm
  • Weight: 2 Kg
  • Consumption: 15 watts maximum
  • Power supply: 115/220 VAC F = 50Hz
Europrobe3.2

CdTe probes Eurorad has developed a wide range of probes based on CdTe detectors, developed and manufactured internally. Several standard models are available, but customised probes can also be produced on request. The multiple benefits of CdTe:

Work at room temperature. Operate at low voltage (maximum 150V). Highly accurate and offer excellent energy resolution at 140 keV (99mTc). Very good detection efficiency between 20 and 170 keV. Availability of small probes adapted for small incisions. Available in wireless Bluetooth version. Possibility of offering customized probes.

haracteristics:

  • Energy: 20-300 keV (Optimum efficiency: 20-170 keV)
  • Isotopes: 99mTc (140 keV), 125I (27 keV), 111In (171 & 245 keV)
  • Medical grade stainless steel
Europrobe3.2

A pioneer in this field, Eurorad offers a very wide range of probes incorporating a CsI (Tl) scintillator coupled to an Si photodiode. The multiple benefits of Csi:

Work at room temperature. Offer a very good efficiency from 100 keV to 1 MeV. Work with a low bias voltage unlike the PMT solution (typically 20V). Available in wireless Bluetooth version. Possibility of offering customized probes.

Characteristics:

  • Energy: 100 keV-1 MeV (Optimum efficiency: 140 keV-1 MeV)
  • Isotopes: 99mTc (140 keV), 131 I(364 keV), 18F (with a collimator, 511 keV), 111In (171 & 245 keV)
  • Medical grade stainless steel

N- LINEt Module-article

N-LINEt-Module Device

 

N-LINEt-Module Device
N-LINEt-Module Device

The Versatile Module The N-LINEt module is a portable unit designed for the treatment of localized body areas.

 

 

Operation

Specifically designed to treat hands, lower legs and feet. Depending on the targeted area, the module can be set up differently for each treatment.

The module operates with a high UV intensity. This makes the treatments particularly short and effec¬tive.

A sturdy case and acrylic panels protect the lamps and allow the patient to place their feet directly on the device. The device is easy to clean and simple to use. The perfect device for serious at home treatments.

The operation of the device is safe and easy to understand. The dosage is simply entered via an electronic timer.

Highly efficient aluminum reflectors maximize the tubes output. The treatment time is shortened and energy is saved.

The arrangement in double rows ensures a more homogeneous light distribution. The arrangement compensates the typical radiation loss at the ends of larger lamps

N-LINEt-Module Device

N-Linet-article

 
 
N-Line-t Device

 

 

N-Line-t Device
N-Line-t Device

Designed for Localised TreatmentsThe N-LINEt is the perfect addition to a photothera¬py cabin.

 

 

 

Technology

The N-LINEt is designed for the individual treatment of hands and feet. The panels allow a precise and gentle irradiation of each area. The therapy is short¬er and easier for patients.

All four lamp groups are equipped with independent UV sensors that monitor and adjust the irradiation..

An easy-to-use microcontroller allows to input the dosage in J / cm². The device automatically calculates the therapy time. For the treatment of the knees and shins, the bottom panels can be arranged vertically. The orientation is automatically detected and taken into account during treatment time calculations.

The closed frame of the N-LINEt protects patients and staff against scattered radiation. The device is equipped with a total of 36 low-pres¬sure lamps for homogeneous light distribution. The arrangement compensates the typical radiation loss at the ends of larger lamps.

The space requirements make the unit ideal for any treatment room. The N-LINEt can easily be moved between treatment rooms. The ergonomic design supports a healthy and com¬fortable posture during the treatment. All features are already included in the base price. Including: dynamic dosimetry and all four treatment panels.

 

N-Line-t Device

Safety

For a safe and precise dose application, the device is equipped with a dosimetry, which continuously measures the UV output of each individual lamp group and calculates the irradiation time in real time.

To avoid unintentionally high dose inputs, corres¬ponding dose limits are preset. Thanks to the special design of the N-LINEt, patients and staff are optimally protected against scattered radiation. Therefore, the modules of the N-LINEt are not mounted in an open frame, but have a largely closed design.

N-Line-t Device